The indicator light of the JMGO N1 can be turned off in "Settings-General-Indicator Switch"

JMGO N1 can be switched on/off by pressing the power button on the stand base, or by pressing the power button on the remote control.

JMGO N1 supports front projection, side projection, and ceiling-mounted projection methods. Special brackets are required for ceiling-mounted installations.

JMGO N1 supports manual brightness adjustment. Please press [Setting] button of the remote control and adjust in [Projector Settings-Brightness] (Brightness ranges from 1 to 10)

• While playing a 3D-compatible movie or video, press the Setting button on the remote control.
• Enter the Settings> Device Preference> Picture> 3D Mode, and select the corresponding 3D format to combine the images.
• Turn on the active shutter 3D glasses and enjoy the movie or video.
• Tip: For a better viewing experience, it is recommended that you use JMGO 3D active shutter glasses.

Yes. Please make sure to use compatible cables that are able to carry and transmit 4K signals effectively.

Yes. Make sure to turn it on on the system settings.「Settings」—「Device Preferences」— 「inputs」— 「CEC」— 「HDMI auto switch」

The JMGO N1 supports the classic 3.5mm headphone jack. Users can also use the HDMI (ARC) interface to output audio, or use Bluetooth to connect speaker devices.

The JMGO N1 is mainly made of plastic and metal. The front-face & front-shell of the projector are made of metal.

JMGO N1 adopts a resin & glass lens. Resin has better light transmission and glass has better heat resistance. The combination of the two creates a projection lens that can achieve the best optical performance.

There is a universal 1/4 screw hole at the bottom of the JMGO N1.